Yammimodder
Extreme
- Joined
- Sep 27, 2012
- Messages
- 72
- Reaction score
- 9
- Points
- 398
- Location
- Corner Brook, NL
- Country
- Canada
- Snowmobile
- 1989 Sno Scoot
2007 Phaxer GT
2008 Vector XTX
2009 Nytro RTX
some pics of my recent nytro build after I got bored with my old vector xtx build.
What I have added:
-Magnaflow 11123 under tunnel exhaust
-Mountain Mod seat
-Yamaha mountain skis with dual Yamaha carbides
-Custom front bumper
-Oil-lite bushing kit for front end
-POR-15 epoxied front a-arms and bumper
-powder coated spindles
-satin black tunnel wrap
-custom gas holder pan for 10 Liter can
-5 inch riser with throttle cable ext
- customized AC luggage rack with bag
- 12v visor plug
-1.75 back country track
- dropped 1 tooth on top gear
I hear the steering relocate kit is a must but I am still getting used to the rider forward so I think I will wait for a while yet. Any suggestions on what you think are must have mods greatly appreciated. thanks.
What I have added:
-Magnaflow 11123 under tunnel exhaust
-Mountain Mod seat
-Yamaha mountain skis with dual Yamaha carbides
-Custom front bumper
-Oil-lite bushing kit for front end
-POR-15 epoxied front a-arms and bumper
-powder coated spindles
-satin black tunnel wrap
-custom gas holder pan for 10 Liter can
-5 inch riser with throttle cable ext
- customized AC luggage rack with bag
- 12v visor plug
-1.75 back country track
- dropped 1 tooth on top gear
I hear the steering relocate kit is a must but I am still getting used to the rider forward so I think I will wait for a while yet. Any suggestions on what you think are must have mods greatly appreciated. thanks.
Attachments
-
20170923_093554_resized.jpg -
20170518_183226.jpg -
20171009_211403_resized_2.jpg -
20171105_204550_resized_2.jpg -
20171106_213909_resized_1.jpg -
20171106_193642_resized_2.jpg -
20171106_193654_resized.jpg -
20171126_211420_resized.jpg -
20171126_213402_resized_1.jpg -
20171206_134837_resized_1.jpg -
20171206_205259_resized.jpg -
20171206_205308_resized.jpg -
20171206_205315_resized.jpg -
20171206_205328_resized.jpg -
20171208_132617_resized_1.jpg -
20171227_145840_resized.jpg -
20171210_194427_resized.jpg -
20180112_162205_resized_1.jpg -
20180122_153449_resized.jpg
radianguy
TY 4 Stroke God
- Joined
- Jan 1, 2007
- Messages
- 1,939
- Reaction score
- 103
- Points
- 1,058
- Location
- Corner Brook Newfoundland, Canada
- Country
- Canada
- Snowmobile
- 2009 Yamaha FX NYTRO XTX 1.75
Great build, looking forward to seeing it in person!
You mentioned the steering relocate, I was hesitant too, (actually I saw no need until I installed the WRP seat, I'm guessing your mountaim mod seat is similar) It does make a big difference.
You addressed the skis (my opinion best improvement you can make on a nytro, and dual carbides) and upgraded the track, all great additions.
I said it before and I'll say it again, 14.5mm rollers ans a YPY spring, night and day difference. (slow speed manuverability greatly improved, a nice little performance upgrade also) I tell everyone with an XTX to do this!
Other than that its all personal taste, you have a nice build there, should suit you well.
You mentioned the steering relocate, I was hesitant too, (actually I saw no need until I installed the WRP seat, I'm guessing your mountaim mod seat is similar) It does make a big difference.
You addressed the skis (my opinion best improvement you can make on a nytro, and dual carbides) and upgraded the track, all great additions.
I said it before and I'll say it again, 14.5mm rollers ans a YPY spring, night and day difference. (slow speed manuverability greatly improved, a nice little performance upgrade also) I tell everyone with an XTX to do this!
Other than that its all personal taste, you have a nice build there, should suit you well.
Last edited:
