help

Hello, I recently bought a 2008 Yamaha Nytro FX. I'm currently looking for some weight reduction options, I would love to find some Carbon Fiber parts for the nytro, such as idler wheels and other suspension components. Any recommendations?

I am currently building my 2007 attack. I am replacing the 136” mono with a 151” 2017 (700 mile) venture suspension ( pivoting rear rails). I am building a different sled as Yamaha has never done something in between on an Apex. It’s either 144 or 162”. I am putting 8t wahl drivers into it also...

Hi, I'm new to this forum although I have followed TY 4 Stroke for the past couple of years. I am installing a temperature gauge on my 2012 Apex XTX and need to know the best/easiest locations to tap in to the 12V and Ground wires. Reading through the other temp gauge installation blogs, the...

Hi all, First time poster, long time observer lol. Has anyone ever had the decompression spring stick or freeze? Any input would be greatly appreciated. Thank you!!

Hey guys, I'm wondering if anyone has performed a SC-5 137" skid swap in a RX Warrior? Just like everyone else, I can't stand the Pro-Action skid, and I found a really good deal on a SC-5 near me. I know swapping in Doo skids is very common for these machines, I was just hoping to hear from...

Ok so I just picked up a custom 2010 Turbo Nytro, 270 HP turbo, turbo smart wastegate and boost controller, msd auxiliary fuel pump, boondocker fuel control. Shimmed so it runs on 91 pump fuel. My question is, how do I use it lol. I have no clue what the boost controller is set too, if I turn...

so snows pretty much gone here in Alberta. have a ton of mods and fixing to do to the sled over the spring-fall. need to get rid of steering slop (replace worn bushings) replace bent spindle change oil/filter chain case oil swap hood, possibly cr racing lightweight hood relocate handlebar...

Looking to drop from my 2018 Mtx’s 153 to an xtx 141. Curious- are these skids/rails compatible? Reason for the drop: I don’t ride out west anymore and only have time for Minnesota trails and the occasional off trail fart around. thanks!

hey. so i picked up a new to me viper with mpi turbo this fall, just a touch over 1000km and currently tinkering and trying to set up and do the recommended mods to make it last and perform better. i usually ride trees but also like to do the odd little hill, and big open meadows. currently i...

Hi Guys, I am new to the forum so thanks in advance for any help you might be able to offer based on your experience. I recently purchased a 2008 Yamaha venture 500 multi purpose. The first couple trips seemed fine but I went to start my machine and I am having some issues. As a back story...

I am wanting a 2up Venture sled for the wife and me. I think.... i am looking for an 07 - 12 year snowmobile. I had the 05 vector to which i had an issue with major darting and not overly happy with it. Any advice or opinions on what to be looking for or to stay away from? Non eps sleds vs...

Hi guys. My sled is having the same issue again as it had at 18,xxx miles. What happened at 18,xxx miles was both fuel pumps started leaking when it sat over night. Thus mixing the gas with the oil/ hydrolocking the motor up when you went to start it the next day. Thankfully I did not damage to...

I took my atv in for a tune up and the muchanic repacked my clutch and put a new belt on but now Iv lost about 7 km of speed as well as I ( think ) some bottom end tourqu. Any one have any idea what my be the problem . Also bike backfires like crazy now befor only a little.

I was wondering if anyone would be willing to assist me in swapping my track. With all of the posts, pictures and manuals I am fairly confident I could do it on my own taking pictures along the way but would feel much more comfortable if someone would be willing hang out and be there to make...

Hey guys. So tonight I was taking my carbs apart for a cleaning, and took these out. Which I believe are the pilot screws? Anyways I took all the jets out, floats off, the pilot screws out, and am going about blowing out my carbs. Then all of a sudden there where parts flying up into my face...

Hey, Just curious if there is a wait time for the VIP membership to come into effect? I paid yesterday and thought it would be something that automatically changes but I don't see anything that says VIP?

Hey guys just blew my first starter on my 14' viper xtx. I have a shop manual but it isnt much help. All it tells me is i need to remove both clutches the air intake, fuel tank and 2 motor mounts then "gently" pry on engine to access starter? im sure someone here has replaced a starter and can...

Can't seem to figure out why my 2016 RTX will only go 66mph at 12k rpm. Mods are a few from Schmidt Brothers as well as a 136" 1.5" free ride. I have Chris' stage 2 clutch kit. Stock gearing (18/41) with 9 tooth drivers. Tested by 2 different riders, talked to Chris multiple times. NEED HELP...

I was trying to set my clock without reading the directions it now says i have 151 miles instead of 94 i just dont get it???????????????

I have a 2011 Yamaha Nytro XTX, I have the standard 1200nmm torsion springs. I am a bigger guy and being a bigger guy has lead me to wanting stiffer torsion springs. Does anyone know if the torsion springs from a nytro RTX will fit in an XTX? The RTX offers 2100nmm torsion springs, and the XTX...