SideHogger
TY 4 Stroke Guru
- Joined
- Apr 16, 2016
- Messages
- 938
- Age
- 54
- Location
- upstate ny
- Country
- USA
- Snowmobile
- 2017 Ltx-Le Sidewinder
Knapp, have you tried the angled BOP arms yet? Or still with stock?It wasn't a Winder but a Viper, still was the GT series however.
I'd have to believe the EPS would also grow to the other winders along with the SRX myself as an option. There aren't many reports on the EPS models other than the owners to say they like them. No details have been shared comparing non-EPS to EPS sleds and the difference.
rtx moose
VIP Member
- Joined
- Jul 31, 2014
- Messages
- 1,141
- Age
- 52
- Location
- WATERTOWN,MN
- Country
- USA
- Snowmobile
- 2017 sidewinder LTX LE,2007 RTX,2000 SRX700
Well guys yamaha has been busy..the just put out three patents for an electric snowmobile
KnappAttack
24X ISR World Drag Racing Champion
- Joined
- Feb 19, 2004
- Messages
- 4,695
- Location
- Welch MN
- Country
- USA
- Snowmobile
- 2023 Sidewinder LTX-LE
2017 Sidewinder LTX-LE
Knapp, have you tried the angled BOP arms yet? Or still with stock?
You mean the bent tie rods? No, I wont install bent tie rods on my sled. Tie rods are made to push and pull, bending them makes them weak and weakening them is not what I'm after. I run stock straight tie rods in the second hole on the arms, no need for bent tie rods in that position as they don't hit the chassis.
SideHogger
TY 4 Stroke Guru
- Joined
- Apr 16, 2016
- Messages
- 938
- Age
- 54
- Location
- upstate ny
- Country
- USA
- Snowmobile
- 2017 Ltx-Le Sidewinder
Yes, that’s what I am talking about. Knowing you would like the new power steering on the newer Sidewinder, I thought you might just have tried the bent arms to see how much easier steering might have been with them so you could save a lot of $$$$ from buying new. I’ll probably mess around with them next year but liking how it is with the stock ones in middle hole.You mean the bent tie rods? No, I wont install bent tie rods on my sled. Tie rods are made to push and pull, bending them makes them weak and weakening them is not what I'm after. I run stock straight tie rods in the second hole on the arms, no need for bent tie rods in that position as they don't hit the chassis.
KnappAttack
24X ISR World Drag Racing Champion
- Joined
- Feb 19, 2004
- Messages
- 4,695
- Location
- Welch MN
- Country
- USA
- Snowmobile
- 2023 Sidewinder LTX-LE
2017 Sidewinder LTX-LE
Yes, that’s what I am talking about. Knowing you would like the new power steering on the newer Sidewinder, I thought you might just have tried the bent arms to see how much easier steering might have been with them so you could save a lot of $$$$ from buying new. I’ll probably mess around with them next year but liking how it is with the stock ones in middle hole.
When I run the Aggressive Snowtrackers on my Doo single keel Race skis it steeres nice and easy. The problem I with have steering for me happens when I run the stock tuners or other setups in the very poor shirt conditions it's hard to steer. I however run very little preload on the front arm spring because I prefer the ride and don't want the transfer on the rear. I set it to run the Snowtrackers and don't change it, but pay the price every time I dont run the Snowtrackers. If I was going to run anything but Snowtrackers most of the time I would lessen the ski pressure a whole bunch more.
Mototown
TY 4 Stroke Guru
number1kyster
TY 4 Stroke God
I agree
The SRX looks great for 2023. I also like the LE.
The SRX looks great for 2023. I also like the LE.
sledding rocks
Expert
any price increase ?Looks sexy
yamaha06
VIP Member
Looks like the SRX LE is already sold out? I wonder how many units they actually had available.
Carbide
Lifetime Member
- Joined
- Apr 20, 2017
- Messages
- 804
- Age
- 59
- Location
- Elk River, Minnesota
- Country
- USA
- Snowmobile
- '15 Apex X-TX -SOLD
'21 Sidewinder L-TX SE
- LOCATION
- Minnesota
jonlafon1
Lifetime Member
- Joined
- Aug 18, 2014
- Messages
- 4,102
- Age
- 50
- Country
- USA
- Snowmobile
- 2022 Sidewinder LTX_SE
2024 Catalyst RXC
2017 Sidewinder LTX-SE. 11750 miles (SOLD)
Sold out? At what price? So you reserve a sled .. And then negotiate what price?? That's crazyLooks like the SRX LE is already sold out? I wonder how many units they actually had available.
View attachment 167483
yamaha06
VIP Member
Sold out? At what price? So you reserve a sled .. And then negotiate what price?? That's crazy
Apparently things are changed this year and you have to reserve a sled and the dealer contacts you, there probably isn't much price negotiating now a days, it does seem crazy but I guess if the demand is there. Looks like you can be put on a wait list and if a unit becomes available your chosen dealer will contact you.
stgdz
TY 4 Stroke Junkie
- Joined
- Mar 27, 2021
- Messages
- 660
- Age
- 46
- Location
- Buffalo MN
- Country
- USA
- Snowmobile
- 19 tcat, 15 4000 RR, 13 800 RR
They kept prices under 20grand. Even the eps and iqs models.
Richard Hodgins
Expert
- Joined
- Mar 5, 2019
- Messages
- 244
- Age
- 46
- Location
- Ottawa ontario
- Country
- Canada
- Snowmobile
- Yamaha powered CAT
I think there was still a 10% increase in price. Great colors on both the SRX AND LE!
Are they really sold out already??
Are they really sold out already??
DranttelSS
TY Advertiser
- Joined
- Oct 9, 2014
- Messages
- 928
- Age
- 58
- Location
- St. Peter MN
- Country
- USA
- Snowmobile
- 2007 Yamaha Attak
- WEBSITE
- www.dranttelsalesandservice.com
Cant place orders in the US till 2PM CST
Similar threads
- Replies
- 3
- Views
- 3K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.