• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Cat DNA Strikes again! -CHAINCASE TENSIONER ROLLER WHEEL FAIL

The auto tensioner had issues with wearing out the puck every couple thousand miles. Most guys who had those sleds changed over to the manual tensioner with a roller.
 

I think the wear block saves the upper bushing from failing as quickly because it gives some. The steel roller won’t compress so you need to run it looser on the chain. This could explain why the cats don’t fail upper bushings as much as the Yamaha’s.
 
I think the wear block saves the upper bushing from failing as quickly because it gives some. The steel roller won’t compress so you need to run it looser on the chain. This could explain why the cats don’t fail upper bushings as much as the Yamaha’s.
Maybe. By cats you mean the zukcats not the yamycats
 
Start running extra oil in the chain case ,Problems will be less likely .Not enough oil gets up top at high speed .
 
John pull it out and I’ll weld it for you, no sense in taking a chance. I can pick it up when we go walleye fishing this spring.
:beer:
Deal! Going to have two to do. I pulled the trigger on a 20 LTX SE. Girlfriend gets the 17 back to stock boost. We needed another sled as the boy started riding.
:drink:
 
Start running extra oil in the chain case ,Problems will be less likely .Not enough oil gets up top at high speed .
If you fill too much it will seep a little out breather. Just about to top of site glass is where I go(About 14 ounces). It does not leak out breather. Much above site glass it will leak slightly
 
Last edited:
Klotz blk formula graphite chain lube works wonders .
 
The auto tensioner had issues with wearing out the puck every couple thousand miles. Most guys who had those sleds changed over to the manual tensioner with a roller.
The auto wore the puck,bushing,chain,gears,shaft and the actuators failed much more often. Issues now are minor in comparison.
 
The auto wore the puck,bushing,chain,gears,shaft and the actuators failed much more often. Issues now are minor in comparison.
Can you imagine that set up on the tunes we’re running on the winders? Lol
 
Deal! Going to have two to do. I pulled the trigger on a 20 LTX SE. Girlfriend gets the 17 back to stock boost. We needed another sled as the boy started riding.
:drink:

Cheapest two beers ever, takes about 30 seconds per adjuster.
:drink::drink:
 


Back
Top