jeff_yam
Pro
There is my setup for the next season, anyone know if this setup will be efficient at mid range and top speed? I'm lookink for advices...
2016 LTX-LE
-Stingray airbox mod
-MBRP trail can
-COTC with GWG primary spring + 2x 1mm glide washers + 8FP weights with 4.5g rivet on tip
-Dalton 46/40 Helix with machined spring pocket
-Pink secondary spring
-8DN belt (with 1x 1mm washers under each of the 3 bolts)
-24/50 gearing (I think about changing for 21/41)
-Dupont slides (seem to have less friction than original slides)
2016 LTX-LE
-Stingray airbox mod
-MBRP trail can
-COTC with GWG primary spring + 2x 1mm glide washers + 8FP weights with 4.5g rivet on tip
-Dalton 46/40 Helix with machined spring pocket
-Pink secondary spring
-8DN belt (with 1x 1mm washers under each of the 3 bolts)
-24/50 gearing (I think about changing for 21/41)
-Dupont slides (seem to have less friction than original slides)
CooperT
TY 4 Stroke Guru
- Joined
- Jan 23, 2015
- Messages
- 790
- Age
- 40
- Location
- Fergus, Ontario
- Country
- Canada
- Snowmobile
- 2018 LTX DX
2016 RTX SE
Is that all you have to do to run the 8DN belt, is put washers under the 3 bolts?
jeff_yam
Pro
Yes
CooperT
TY 4 Stroke Guru
- Joined
- Jan 23, 2015
- Messages
- 790
- Age
- 40
- Location
- Fergus, Ontario
- Country
- Canada
- Snowmobile
- 2018 LTX DX
2016 RTX SE
Thanks bud!
09nytro
TY 4 Stroke God
There's more to it thAn just the three bolts to do it properly... But you can do it that way ...
bleedyamaha
TY 4 Stroke Master
- Joined
- Sep 28, 2013
- Messages
- 1,491
- Location
- Northern Iowa
- Country
- USA
- Snowmobile
- 2017 Yamaha Sidewinder Rtx Le 2012 Yamaha Vector Ltx
That's my set up I also have extra wheels and studs. I switched out my gears to the 21/41 and picked up 3/4 mph. Midrange is good. I drag raced a 800 etecs from a stop and we were dead even till 85 mph. We had to slow down.. Very happy with this set up. Love my sled but I am going to try and sell it to buy the new Sidewinder.