throttle_out
Newbie
- Joined
- Dec 21, 2023
- Messages
- 3
- Age
- 40
- Location
- Holmen, WI
- Country
- USA
- Snowmobile
- 2019 Yamaha Sidewinder LTX-LE
Hi @MrSled I know I already PM'd you about this, but I just wanted to post here in the thread to see if anyone else has any interest in him making up some more of the harnesses. I am on the list, but he needs more interest from people to make it worth his time. I am looking at doing this upgrade to my 2019 LTX-LE during the next off-season and having a pre-fab'd harness would be beneficial!
- Joined
- Apr 13, 2003
- Messages
- 21,541
- Age
- 54
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
I would also make the splitter for the flasher juke box.
1nc 2000
Lifetime Member Tim
- Joined
- Feb 26, 2010
- Messages
- 3,173
- Location
- Marquette, MI
- Country
- USA
- Snowmobile
- Yamaha FX Nytro RTX SE
I'll take power steering harness and splitter for flasher for 17 sidewinder.
Summer project for me.
Summer project for me.
- Joined
- Apr 13, 2003
- Messages
- 21,541
- Age
- 54
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
Ok I’ll get them made and let you know when ready.
Farmer 73
Lifetime Member
- Joined
- Feb 20, 2015
- Messages
- 413
- Age
- 66
- Country
- USA
- Snowmobile
- 2010 NYTRO RTX SE, 2012 VECTOR, 2001 SXR 600, 2001 PHAZER, 2000 PHAZER, 1983 ENTICER EXCELL III
Tom, I just picked up a 2022 SR Viper for the wife, do you think the Yamaha EPS will work on it? Would like to go that route if I could instead of the GSE kit.
- Joined
- Apr 13, 2003
- Messages
- 21,541
- Age
- 54
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
Yes it will work with some mods to the air box.
EPS Conversion?
Who has done this to Viper or 7000? I want to know if the air box goes back in without interference. I am near completion on my Viper. The airbox does require minor modifications in two areas: a flat on one corner (screw clearance), and a "D" shaped hole just above the flat (for eps motor power...
Farmer 73
Lifetime Member
- Joined
- Feb 20, 2015
- Messages
- 413
- Age
- 66
- Country
- USA
- Snowmobile
- 2010 NYTRO RTX SE, 2012 VECTOR, 2001 SXR 600, 2001 PHAZER, 2000 PHAZER, 1983 ENTICER EXCELL III
Thanks!Yes it will work with some mods to the air box.
EPS Conversion?
Who has done this to Viper or 7000? I want to know if the air box goes back in without interference. I am near completion on my Viper. The airbox does require minor modifications in two areas: a flat on one corner (screw clearance), and a "D" shaped hole just above the flat (for eps motor power...ty4stroke.com
