PVC duct to direct Cold Air to Turbo

[hellflyer]

Today it was -6c and I was seeing as hi as 25C on the intake and as low as 18C and with it in the belly it was 35C and up.

 

[STAIN]

I rode this week in some warmer temps. My intake air was anywhere from 98 to 125 degrees. I called Hurricane and told what I wanted to do and he sent me some parts to make my own. I plumbed to so the air filter is directly behind the frog skin in the nose area. I did have to cut my side panel.

 

[ryan11007]

I rode this week in some warmer temps. My intake air was anywhere from 98 to 125 degrees. I called Hurricane and told what I wanted to do and he sent me some parts to make my own. I plumbed to so the air filter is directly behind the frog skin in the nose area. I did have to cut my side panel.

i ordered a bumper and the nose will be a bad place for me. i called dave too. gonna get the cold air intake kit. if u got pics id like to see how u made out.

 

[hellflyer]

With my intake beside the rad I was running 65deg intake temps with 26deg outside temps!

 

[STAIN]

 

[hellflyer]

That's exactly what I did at the beginning of this year and ending up with to much heat. Then moved it to the side of the rad!

 

[Joshua]

Looks good stain. Keep an eye on your air fuel gauge. I plumed my intake to the outside and I noticed I was running lean @ wot

 

[STAIN]

Looks good stain. Keep an eye on your air fuel gauge. I plumed my intake to the outside and I noticed I was running lean @ wot

Good advice. I didn't think of that.

 

[Red Rocket]

Good advice. I didn't think of that.

Has anyone come up with a way to route the intake with a 240 hurricane kit with an intercooler?

 

[STAIN]

Tested my set up yesterday. I dropped 25-35 degrees on intake temp. 1 bonus was the noise I was hearing from 25-35 mph and assumed was the Hindle exhaust seems much quieter. It must have been intake resonance. I even took my earplugs out and didn't use them the rest of the day.

 

[Joshua]

How was your air fuel ratio?

 

[STAIN]

10.5-10.7 WOT

 

[ClutchMaster]

This is the way to do it, cost is nothing, just flip the elbow and cut the side panel. Looks badass IMO and temps drop WAaaay down.

 

[ClutchMaster]

 

[BergHawken]

Has anyone tried to use the arctic cat style intake which already has mesh on it.
You should be able to cut it out Or simply use the AC console.