TD-2017 2019 Sidewinder SRX Belt Adjuster With Float

[hmmrdwn]

Turbo Dynamics
2017 2019 Sidewinder SRX Belt Adjuster With Float

When installing this i was told to remove the shim behind the secondary because the clutch will now float. Once it is tightened up there is no movement in and out on the shaft. no float. Am i doing something wrong? i dont want to blow belts. stock setup offset was perfect. no belt issues or abnormal wearing.

 

[DMCTurbo]

Once your secondary starts to open you will begin to have float.

 

[IBABAD1]

When installing this i was told to remove the shim behind the secondary because the clutch will now float. Once it is tightened up there is no movement in and out on the shaft. no float. Am i doing something wrong? i dont want to blow belts. stock setup offset was perfect. no belt issues or abnormal wearing.

You need to install 2 flat washers between bolt and spacer.

 

[hmmrdwn]

no this replaces the spacer and 2 washers.

 

[hmmrdwn]

Thanks DMCturbo. any idea how they accomplished this? i'm just curious.

Thanks

 

[hmmrdwn]

Thanks DMCturbo. any idea how they accomplished this? i'm just curious.

Thanks

maybe Ben can explain it.