vodoo child
Expert
- Joined
- Oct 29, 2005
- Messages
- 464
- Reaction score
- 269
- Points
- 1,088
- Location
- Palmerton Pa.
- Country
- USA
- Snowmobile
- 2018 Sidewinder LTX/LE 50th
First off I'm no clutch guru. Get all my info here on TY as a lurker. I put 608 miles on my bone stock sled in Maine two weeks ago. After I went over the sled once home, discovered I had one flat spotted secondary roller. So rather then replace the so called updated secondary rollers. I placed an order to Thunder Products. I installed the the two lubricated glide washers in the primary with the stock factory spring. In the secondary I installed TP's 33/35 billet helix with there Orange spring set at 3/3, TP's secondary rollers and the factory 8jp belt. I weigh 260 lbs. suited up and strictly big mile trail ride with the occasional full wack of the flipper on a rail bed or long straight stretch. No racing or aggressive corner to corner riding. With the belt and heat issues some are having. Will this setup be good for my style of riding?