OSP SR Viper belt adjuster with float

[Martens199]

Just ordered mine! To bad the Canadian dollar is in the toilet...

 

[birkebeiner]

Just ordered mine! To bad the Canadian dollar is in the toilet...

Don't complaint, the Norwegian Oil Kroner (NOK) is down 30% against USD since last year...


Birkebeiner

 

[onestopjim]

Jim,
I see you are based in Howell? I just live around the corner from your shop. Was wondering if I could just stop in and buy a couple of these adjusters or is it web site ordering only? Just picked up a couple vipers for my wife and I , those adjusters look like the cats meow!!! Lol

Yes give me a call 517 861 7122 thanks

 

[Yamadog]

Just ordered mine! To bad the Canadian dollar is in the toilet...

Well at least you guys don't have Obama care!!!!!! Besides last time I checked your toilets were pretty cheap

 

[Martens199]

So what do I want to see for belt drop and float in the secondary? What are the specs of adjustment.

 

[cannondale27]

When real close the belt will squeal a bit at idle after coming to a stop. At that point back off the adjuster 1/2 turn. You will have perfect Belt Deflection.

 

[cannondale27]

Shipped some shocks to Canada last week. $47 for the exact same shipping the Canadian customer paid $28 for. I dont get it. Shouldnt he have paid more or am I thinking backward?

 

[yamamarc]

was looking at the osp video and noticed he was about 2 threads showing on the adjustment they made, mine has no thread showing actually minus 2 threads with 8 dn I'm getting a slight creep(track moving very slowly)
is that ok I never checked deflection maybe I should start there. What is the deflection

 

[cannondale27]

I have never set any using a measurement. Its to vague. Too many factors. You dont want belt trying to grab belt at idle but you want it as close as possible to that for nice seemless engagement.Yamamarc either your sled has very little drag on stand or you are very close. When snow comes try it and readjust if needed.

 

[Srxspec]

Belt Adjustment tips

http://www.ulmerracing.com/Belt deflection.pdf

 

[cannondale27]

Perfect!

 

[yamamarc]

I have never set any using a measurement. Its to vague. Too many factors. You dont want belt trying to grab belt at idle but you want it as close as possible to that for nice seemless engagement.Yamamarc either your sled has very little drag on stand or you are very close. When snow comes try it and readjust if needed.

it's hard to get it "right on the money" on the stand track off the ground it creeps! but like you said I will find out once on snow (or grass lol)

 

[yamamarc]

Belt Adjustment tips

http://www.ulmerracing.com/Belt deflection.pdf

thanks for that!!!! it's seem perfect in the way it's explained!!!!

 

[cannondale27]

Mine does to. Actually more than creeps. Rolls pretty good and gets progressively faster but just remember the squeal thing I told you about. If you hear a squeal when stopping after riding back off 1/2 turn it will be as good as possible.

 

[Yamatario]

Just order mine this morning. Can't wait to install it.