Search results

At the Soo 500 the Apex's took 5 out of the top 10 positions, plus 1st and 2nd. That has to say something about durability.

My rear pivot arm wouldn"t take any grease. Dealer order new part and tried replacing the arm but new one would take grease either. He then removed old zerk and retapped a new one in. Did this on both my sleds, now they will take grease. I asked about grease leaking out the sides and he said...

Only problem is that we don"t have to stop that often at a gas station to show off our sleds. Nice problem.... Love the gas milage and lack of oil purchases.

Got 2450 miles on orginal belt seems to be working fine.

I had a 01 600 Classic w/M10 and wife a 03 XCSP 500 w/M10 Love the ride of the M10. We are both riding ER's Apex & Vector. Not as a smooth ride but as the M10. Apex classy similar to Nitro with the 1200 motor rides great for me. I like the sitting postion much better. Played with the...

I use the spare key. Looks like the fob could snap off and leave me stranded. Usually travel cross country with saddle bags many miles from my truck. I carry the fob zipped inside my jacket as a spare.

Vector with 2480 miles getting 18 to 20 easily every tank. Also love the oil comsumption like zero. Put about 2 ounces of oil in after the first oil change. Love them 4 stroke. Funny after switching to 4 strokes I can smell two strokes on the trail. Can"t believe how bad that oil smells!

If you turned down the warrenty at time of purchase can you buy one now for a 2006 with 2500 miles? Been thinking maybe it would be a bad investment. Only problem so far has been idler wheels had 2 replaced and now getting 4 more replaced. Actually lost the whole idler wheel on of one of the...

Apex is getting between 14.5 and 15.5. I had about 120 miles between gas stops and took 8.5 gallons on one ride. Thinking I can get 150 miles on full tank of 10 gallon. Fuel light came on at about 110 miles which got me excited because we hadn"t seen a gas station during this time. My...

What about a Nitro for her? Apex chassis with 1200 cc Vector Motor. May half to invest in a higher windshield.

I found starting the Vector I turn the key and open the choke gradually until it fires and then gradually back off the choke as quickly as I can and keep it running and then let it climb to temp with choke off. Usually about half choke is all that is needed.

I have Woody Doulleys and shims on my wife"s sled and you can"t keep it from wandering left to right not just dog tracking but consently wanders and can't hardly turn it in the corners. VEctor 06 4 carbides no studs and 1/4" shims. Got it back to to dealer again. It rides like a lumber wagon...

I had mine replaced at 425 miles with no studs. Second set has about 125 miles and look ok. Leaving for a trip of @1000 to 1200 miles tomorrow and wondering how the idlers are going to hold up.

Not sure if you read it or not but someone gave a great tip on adjusting the limiter strap of few weeks ago. Lift the rear of sled up and slide something under the track near the limiter strap: stack of wood or garage dolly and then let the rear down on the dolly. This will give enough slack to...

Been messing wilth your supension? Sounds like there is more then just a ski problem. Might want to adjust the transfer rod to see if it makes a difference in the ride.

I did it the hard way. Took the ski off and cut a piece of plastic from an old slide about 1/4 in thick and 1 1/2 wide with a hack saw. Place the plastic material on the back side bottom of the rubber bumper where the ski mounts to the sled. I used some Goop and a screw. Not sure about the...

I bought a set of Choko Deluxe Bags and had an extra strap sewn on the bottom so I could attach each side to the rear bumper away from the exhuast pipes. Seem to work ok, side bags fairly roomy and a small top bag. Planning on a 5 day trip next week so what ever I can get into the bags will be...

Are you talking Woody Duolley"s with two carbides on each skag? The 6" Duolley"s is what I am running. Seem to work well on my sled with no studs. I am going to wait to stud next season. Too late now. I ran Woodies for a few years on Polaris's and seem to eliminate some of the dog tracking...

The Vector is a fun sled to ride, but if you are look for a few more horses and a modified Rev ride try the Apex, that will make you grin and will have some of those other sleds in your mirror.

I ran Weds about 150 miles in Cadilac Mi on freshly groomed trails pass a groomer twice with no problem dog tracking. However, I shimmed the back side of my skis about 1/4 inch and seemed to work great. A tip that was discussed early on the formum.